It is important to keep windows in good repair because they help keep drafts out and heat in. A do-it-yourselfer can fix many wood-framed window problems but consult a professional if the problem is serious.
For example, a misfit mortise plate can be loosened by applying a low-viscosity oil such as WD-40. A strip of strong-hold tape will also stop superficial cracks from worsening. Contact Window Repair Naperville now!
Cracked glass is one of the most common window problems. It can be caused by anything from a bad storm to a pebble from your lawnmower hitting the windowpane. Broken glass doesn’t look good and creates a security risk. It can also make it hard to keep your home cool in the summer and warm in the winter.
If your glass is cracked, you must act fast before it worsens. Thankfully, you can do some simple things to repair it and get your windows back to normal.
First, make sure you’re working in a safe area. If you’re working with shards of glass, cordon off the area and put on heavy gloves and safety glasses to protect yourself from injury. Next, take the time to clear away any loose shards of glass and dispose of them properly.
If you’re working with a single pane of cracked glass, a quick fix is to apply heavy-duty tape to hold it together. Tapes like masking or packing tape will work for a while and can prevent the crack from spreading until you can replace the pane.
Another easy solution is using a clear plastic cover to prevent the crack from spreading. This will help keep drafts out and your home’s temperature stable until you can get the cracked glass replaced.
For cracked window glass that’s difficult to replace, a solvent-based adhesive can help. This type of glue is formulated to be stronger than super glues and can provide a long-lasting seal for your window.
Using a rag, wipe the surface of the glass where the crack is to remove any grease or dirt. Apply the adhesive to both sides of the crack and press them together carefully. Be careful not to flex the window, as this may cause the crack to spread.
A common error in repairing a new window is adding too much or too little putty to the frame. If you add too much, the frame may swell and cloud the new glass. Too little putty will leave the new pane loose in the frame and allow drafts into your home.
Sash Problems
As time passes, sash windows can lose their functionality. This is common in wood sashes, but can also affect aluminum window frames. Some sash problems can be addressed by a little general maintenance, but others require professional attention.
If your sash window doesn’t open or close properly, it could be caused by broken sash cords or a misaligned track system. These issues can lead to moisture infiltration, which can have a number of negative side effects. For example, water can promote mold growth, and damp wood is prone to swelling and decay.
It’s important to regularly inspect sash windows for moisture. This will help to identify problems before they worsen. For example, you might notice that the sash frame is warping or that the paint has cracked and peeled. These are signs that there is excessive moisture in the air, which can cause serious problems with the integrity of your sash.
Another issue that can arise with sash windows is that the wood can begin to rot. This can be caused by a variety of things, but it’s usually a result of improper ventilation or exposure to the elements. In this case, it may be necessary to replace the sash with a new one made of an alternative material.
A common problem with sash windows is that the sash weights can become unbalanced or break. This can affect their operation and make them difficult to operate. The solution is to replace the sash weights or alter their pulley system.
Another thing that can cause sash windows to break down is that the putty holding them together becomes hard and cracks. This can loosen the hold of the glass on the frame, allowing it to leak and lead to further damage. If the putty has gone bad, it needs to be replaced as soon as possible. It’s also a good idea to use caulking to seal the joints of the sash. This will help to prevent moisture from seeping in and causing damage to the frame and glass. If you have a lot of old paint buildup on the sash, it’s also a good idea to remove it.
Drip Caps
A drip cap is a piece of formed flashing, usually metal, that’s installed above windows and doors. It’s designed to shed water away from a window and prevent it from infiltrating into the house. Also known as head flashing or z-flashing, it’s a critical component in protecting the integrity of a window installation.
Most flanged windows require them, but vinyl and other uni-body window installations often don’t have drip caps. It’s easy to overlook their importance, but not installing a drip cap could lead to moisture problems down the road.
Drip caps are typically L-shaped, and one leg goes over the brick mold of a window or door frame, while the other lies behind the siding that will go above. Some window and door frames have built-in drip caps, but they’re also commonly installed separately. It’s important to avoid caulking the area where the drip cap meets the lower edge of the siding, as this could create a leak point.
When a drip cap is properly installed, it should slope outward to encourage drainage and protect the top of the window seam. A flat drip cap, on the other hand, can cause water to run backward toward the corners of the window frame—weak spots that could eventually lead to moisture intrusion and structural damage.
If you notice that a drip cap isn’t properly sloped or if it’s missing altogether, you can easily fix it. Most commercially available drip caps have a back leg that can be bent down, and you can also fabricate one yourself if you’re handy with a metal-bending brake. Just bend down the end-dam leg of the drip cap so that it covers the trim and is flush with the face of the window, then use a bit of silicone or other weather stripping to seal the gap.
Window Casing
Window casing is the trim that frames your windows and adds to your home’s aesthetics. It also seals gaps and prevents drafts, which helps with energy efficiency. If your window casing is damaged, it’s important to repair it. Otherwise, you’ll be letting cold air into your house and paying more for heating. This guide will show you how to fix your trim using a variety of tools and materials.
When repairing your window casing, it’s important to be careful and take your time. You don’t want to accidentally damage the window. The first step is to remove the old casing. This is easily done by scoring around the edges with a utility knife and prying it off with a crowbar. You should then scrape off any caulk that’s stuck to the wall.
Once the old trim is removed, you can start assembling the new casing. Begin by measuring from the side of the window to the inside of the top/bottom casing. Then, cut two 1x3s to that measurement. Then, measure from the back of the top/bottom casing to the inside of the side casing boards and add.5” to that measurement. Then, cut the bottom board to that measurement. Now you’re ready to nail the sides of the new casing in place.
Before you start putting the trim up, make sure that you have all of the right tools and supplies. You’ll need a miter saw, a hammer, a level, and a utility knife. Make sure to wear earplugs or earmuffs when working with the hammer and saw.
Once the new trim is in place, you can begin painting. When you’re finished, you should have a beautifully restored window! It’s important to keep your windows in good condition, as they serve both functional and aesthetic purposes. If you have any questions about repairing your windows, give us a call! Our experienced team will be happy to help. We specialize in all types of interior and exterior window repair. So, whether you have a broken pane, leaking sill, or need a full window replacement, we’ve got you covered!